<!-- Markdown copy of https://openkiwi.ai/cameras for AI tools. The page itself is the source of truth. -->

# Which cameras work with Kiwi?

> Kiwi works with cameras that share their picture on your home network (RTSP or ONVIF): Reolink, Tapo, Amcrest, Hikvision, Foscam and more. Ring and Nest do not.

OpenKiwi is a home app that uses AI on your own computer to look in on your parents, pets and home through the cameras you already have.

**Short answer:** Kiwi works with cameras that share their picture on your home network (RTSP or ONVIF), including Reolink, Tapo, Amcrest, Hikvision and Foscam. Ring, Nest and Blink do not work.

From OpenKiwi. Checked November 14, 2026.

## Which camera brands does Kiwi set up?

Kiwi builds a camera’s address from its brand and its IP address, so you do not type an rtsp:// address. “Address format confirmed” means the maker’s own page gives that address format. It does not mean the setup has been confirmed on a real camera. Kiwi runs on two Eufy cameras in its founder’s home (since November 14, 2026); the setups for the other brands come from each maker’s own documentation and have not been confirmed on a real camera yet.

| Camera | Turn this on | Status in Kiwi |
| --- | --- | --- |
| Reolink | In the Reolink app or client: Network settings, Advanced, Server Settings, and make sure RTSP is on. Use the camera’s own user name and password. | Address format confirmed from [Reolink’s page](https://support.reolink.com/hc/en-us/articles/900000630706-Introduction-to-RTSP/). Older models with a different address are not covered. |
| TP-Link Tapo | In the Tapo app: the camera, Settings, Advanced Settings, Camera Account. Make a user name and password; they are not your Tapo sign-in. | Address format confirmed from [TP-Link’s page](https://www.tp-link.com/us/support/faq/2680/). Second lenses are not covered. |
| Amcrest or Dahua | Video sharing is on by default. Use the camera’s own user name and password, the ones you set in its web page, not your Amcrest account. | Address format confirmed from [Amcrest’s page](https://support.amcrest.com/hc/en-us/articles/360059019972-Accessing-Amcrest-Products-Using-RTSP). Dahua cameras answer the same address, which has not been checked against a Dahua page. Amcrest Smart Home cameras and recorders are not covered. |
| Hikvision | Video sharing is on by default. Use a user name and password made on the camera itself (web page, Configuration, System, User Management), not a Hik-Connect sign-in. | Address format confirmed from Hikvision’s technical bulletin “RTSP and HTTP URLs”. Some older recorders use another address and are not covered. |
| Foscam | In the camera’s web page: Settings, Network, Port. Use the camera’s own user name and password, and the port shown (88 on older cameras, 554 on newer). | Address format confirmed from [Foscam’s page](https://www.foscam.com/faqs/view.html?id=81). |
| Any ONVIF camera | In the camera’s app or web page, turn on ONVIF (often under Network or Advanced) and make a camera user name and password. | Kiwi asks the camera for its own picture address, as the [ONVIF standard](https://www.onvif.org/specs/srv/media/ONVIF-Media-Service-Spec.pdf) says. |
| Eufy | In the eufy Security app: the camera, Settings, Storage, “NAS (RTSP stream)”. Turn it on and make a user name and password. | In use: Kiwi runs on two Eufy cameras in its founder’s home (since November 14, 2026). Eufy does not publish the address format, so the maker has not confirmed it, and which Eufy cameras have this setting is not confirmed. |
| Wyze | Needs Wyze’s special RTSP firmware, which Wyze no longer maintains. Then Settings, Advanced Settings, RTSP in the Wyze app. | Address format not confirmed. Wyze does not publish the address, and guides disagree on it. |
| UniFi Protect | In UniFi Protect: the camera, Settings, Advanced, turn on a stream, and paste the link Protect shows. | Address format not confirmed. Kiwi has not played Protect’s secure stream. |
| Ring, Nest, Blink | Nothing to turn on: these cameras do not share their picture on your home network. | Do not work with Kiwi. |
| A computer webcam | Nothing to turn on. The computer asks permission first, and the microphone stays off. | Works for one room, and only while Kiwi’s page stays open. |

## How do I turn on RTSP on my camera?

Look in the camera’s own app or web page for a setting called RTSP, ONVIF, “NAS” or “camera account”, and make a user name and password for the camera itself. The table above says where it is for each brand.

Then add the camera in Kiwi. Kiwi looks for cameras on your network itself. Or you pick the brand and type the camera’s IP address and the sign-in you made. Kiwi checks that the camera sends a picture before it connects it.

## Is it risky to turn on RTSP?

RTSP shares the camera’s picture with devices on your home network, normally behind the camera’s own user name and password. The main risk is a camera that can be reached from the internet.

- Do not forward the camera’s port on your router, and do not open Kiwi’s own port (5173) to the internet.
- Kiwi refuses a camera address that is not on your home network, or that is the computer itself.
- Use a strong password for the camera’s own account, not the one for the maker’s app.
- Camera passwords stay on your computer; Kiwi does not send them anywhere.

## Does the camera’s picture quality matter?

Kiwi shrinks each camera’s whole picture to about 448 pixels before the AI reads it, and can take a closer look at a person or a pet from the full picture. Night and infrared pictures are harder. The lowest resolution that works has not been measured yet.

## How many cameras can Kiwi use?

Up to four at once, and twelve can be saved. Checks take longer with more cameras, and how much longer has not been measured yet. Kiwi asks whether a camera’s room is somewhere someone sleeps or washes, and keeps that camera out of every note and message until the person who uses it agrees.

## Why don’t Ring, Nest and Blink work?

Kiwi reads a camera’s picture straight from your home network. Cloud-only cameras do not offer that: they send their video to the maker’s servers instead. Kiwi has no way to ask a cloud for it. If you are choosing a camera, see the [guide to Ring alternatives](https://openkiwi.ai/guides/ring-alternatives-without-a-subscription) and the [guide to adding AI to the cameras you have](https://openkiwi.ai/guides/add-ai-to-existing-security-cameras).

## Quick questions

### Does Kiwi work with my Reolink camera?

It can. Kiwi builds a Reolink camera’s address from its IP address once RTSP is on in the Reolink app. Reolink’s own page gives the address format, but Kiwi has not yet been tried on a real Reolink camera.

### Does Kiwi work with Tapo cameras?

It can, if the camera supports RTSP. In the Tapo app you make a camera account first, and Kiwi then builds the address. Kiwi has not yet been tried on a real Tapo camera.

### Does Kiwi work with Eufy or Wyze cameras?

Eufy: Kiwi runs on two Eufy cameras in its founder’s home (since November 14, 2026), though Eufy has not confirmed the address format. Wyze: maybe. It is set up from Wyze’s documentation, not confirmed, and needs special firmware that Wyze no longer maintains.

### Can I use any camera?

Any camera that supports ONVIF can be added, using the camera’s own user name and password. A camera with no RTSP or ONVIF setting cannot.

## Where this comes from

Each brand’s address format and the setting that turns it on come from OpenKiwi’s own code, which cites the maker’s page for each (checked in the code on October 17, 2026, and the code’s notes re-read on November 14, 2026). The Reolink, TP-Link, Foscam and ONVIF pages opened on November 14, 2026. The Amcrest page blocked automated checks that day, and Hikvision’s bulletin did not load. The code isn’t public yet. See also the [fact sheet](https://openkiwi.ai/facts).

## More about OpenKiwi

- [What is OpenKiwi? The facts](https://openkiwi.ai/facts)
- [What computer and cameras does Kiwi need?](https://openkiwi.ai/requirements)
- [Where does my camera video go?](https://openkiwi.ai/where-the-video-goes)
- [How do I know my parent is up in the morning?](https://openkiwi.ai/parent-up-in-the-morning)
- [Can ordinary cameras detect a fall?](https://openkiwi.ai/fall-alerts-from-ordinary-cameras)
- [Pendant or camera for a parent who lives alone?](https://openkiwi.ai/pendant-or-camera)
- [Should I put a camera in my parent’s home?](https://openkiwi.ai/camera-in-a-parents-home)
- [Privacy notice for this website](https://openkiwi.ai/privacy)
- [The Kiwi guides](https://openkiwi.ai/guides/)
- [Join the waitlist](https://openkiwi.ai/#signup)

---

Page: https://openkiwi.ai/cameras
Join the waitlist: https://openkiwi.ai/#signup
Contact: hello@openkiwi.ai
